Creality is a well-known make that has embraced its widespread infamy for delivering some of the most reliable and top-quality printers over the years.
The biggest problem we have with Creality is with their constant creation and additions of many, many capable and fantastic machines in their lineup, it is getting consistently more difficult to choose the best machine for yourself.
That is why we are here, and probably why you are here too.
Today, we intend on drawing out the major differences between the four Creality Ender printers and hope to help you come to a satisfying conclusion on what is the perfect printer for you.
These four printers are the Ender 3, Ender 3 Pro, Ender 3 V2, and the Ender CR-6 SE. These are some of the most efficient printers you can find on the market today.
If you are seeking a fast answer on which is the top-dog, then we can tell you it is the CR-6 SE. This is simply due to it being jam-packed with the latest state-of-the-art features, which provides you with outstanding value for money.
Below we will give you an in-depth analysis, break-downs of each printer, with specs and top features, as well as a focus on the contrasts in their variations.
OUR TOP PICK
The Ender 3 was released in March 2018, and ever since its release, it has been the example of top-notch phenomenal budget 3D printing.
This is why you will find that Ender 3’d quality is on par with similar printers that sit at the $1000, but instead available at the cost of less than $200.
While every 3D printer has things that make it good, there are several features that this printer has that make it what it is, including a sizeable print volume amounting to 220x 220x 250 mm, which is just the tip of the iceberg here.
Not only this but it also has an instant recovery mode that has become well-known by the infamous Prusa i3 MK3, as well as a high-quality heated build plate, and many other fantastic features as well.
What grabs us about this printer is that all of these are qualities that are generally non-existent in some expensive printers, and so the Ender 3 does an incredible job of giving you outstanding value for such little cash. Especially when you compare it to the rest of the market.
It is also versatile, performing well with a vast array of filaments such as ABS, PETG, PLA, and even some more exotic filaments.
You may encounter moderate warping or curling issues with some thermoplastics, but these are nothing that cannot be handled. What is even better is that Ender 3’s constricted filament pathway allows for superb ease when printing with flexible materials like TPU.
The one hassle that stands out with this budget-friendly Creality printer is its uneven base. Stability is one of the main factors that provide you with a great print, so this could be a point of suffering.
That being said, it can be a problem easily solved with a simple wedge or a shock of some sort places correctly.
Despite this, the Ender 3’s merging of quality and low-costs, gives it the label of one of the best 3D printers you can get. Though there are a few downsides and troubles along the way, the pros of this printer outweigh the cons.
Specs of the Ender 3.
220 x 220 x 250 mm
Max Print Speed
Min Layer Resolution
Filament Diameter and Compatibility
1.75mm, PLA, ABS, TPU
SD Card/ USB
Not long after the release of the Ender 3, came the Ender 3 Pro edition, with its price tag settling only a little higher than its predecessor, at $300.
Which is also a price that has been slowly getting lower. As a successor of the Ender 3, the Ender 3 Pro is definitely worth the extra dough, as it gives you even more than the basic Ender 3. Not that we thought it possible.
There are a plentiful amount of significant improvements that can be seen in this newer version, namely, its high print performance sits in the spotlight.
While the build volume is the same as the previous model, being decent and fairly spacious, it has enhanced mechanical properties. This model has received a focus on being made more stable.
Another one of the major additions added to this printer is its convenient magnetic print bed, this allows the removal of prints in a much less damaging manner.
Even more so, its new refined surface helps to grab that extra adhesion for the first few layers, which are increasingly important.
The Ender 3 Pro, is an excellent printer for many different uses for many people. It can be used easily by tinkerers, enthusiasts, hobbyists, and even those who are studying 3D printing.
That being said, Creality could have possibly been a little more considerate with the magnetic plate that has been told to be a bit insubstantial and flimsy. The bed also required proper alignment so that everything is in motion.
Another downside of this is that you have to manually adjust and level the printing bed. Automatic leveling could have been a real clincher for the Ender 3 Pros, but it seems that it does not quite cut it.
While it has these issues, it also has some top-class features for power recovery and tight filament feed, much like its predecessor. It has also covered some of the flaws of this predecessor as well.
For a start, the assembly is a breeze with the Pro model, and you can start printing soon after it has arrived on your doorstep with minimal issues in setting it up.
Overall, the Pro version won’t have you regretting your purchase, and it’ll deliver more than what you would expect at the price you pay for it.
Specs of the Ender 3 Pro
220 x 220 x 250 mm
Singular 0.4 mm
Heated Bed Temperature
Max Print Speed
0.1- 0.4mm (100-400 microns)
+/- 0.1 mm
SD Card Compatibility
The Ender 3 V2, is the elementary Ender 3’s most direct and foremost replacement. It adds more depth to Creality’s Ender series and boasts some interesting new features and enhancements.
First of all, starting with the design, this printer has received some major overhaul in the terms of its aesthetic look and feel.
They made sure that the Ender 3 V2 makes its mark as a premium product on the market. It has plastic coverings across the printer that contributes to a professional appearance.
The print bed needs to be manually adjusted much like on the previous versions but it should not trouble you much.
Once it has been set straight the V2 prints flawlessly with a variety of different filaments and can produce prints at a stellar quality.
It is also engineered to be able to handle many different complexities and variations, so if you like to be a bit pickier with your prints, then the V2 has you covered there.
One more noteworthy addition to this printer is the fantastic glass tempered print bed with works brilliantly when it comes to adhesion.
As you may know, when printing, the first few layers of the print are essential to forming a quality end print. And thus, the bed’s textured surface, like in the Ender 3 Pro is more than enough for this challenge.
The V2 also has other compelling changes that have been made since the Pro, like an LCD colored screen that elevated the general interface, as well as a 32-bit motherboard that helps to enable quieter printing, for those headachy days.
The 2560 chipset here also holds enough power for bringing down the noise level to only 50 decibels, which is pretty impressive.
Even more, improvements include the addition of knobs that allow you to adjust the belt tension, as focusing on long-term usage, a handy toolbox that you can use in which to store items, such as needles, or nozzles, or whatever else you need for your printing.
But, yes there’s a but, much like the Ender 3, there is still one niggling little complaint. The feeding of the filament is done through a hole that is just beside the leadscrew, which can make the process a bit of a pain at times.
This could certainly be improved by an upgrade, and it’d certainly make the V2 the best printer of this time, especially in the $300 range. You can’t go wrong.
Specs of the Ender 3 V2
3rd party Filaments
Max Build Volume
220 x 220 x 250 mm
Max Extruder Temperature
Max Heated Bed Temperature
Max Print Speed
Enclosed Print Chamber
PLA, ABS, PETG, TPU
LCD Color Screen
MicroSD card/ USB
Finally, the Ender CR-6 SE is Creality’s first-ever printer that was funded by a Kickstarter campaign, and even more surprisingly, despite this, it is one of the best machines that Creality ever made.
The CR-6 SE is an exceptionally reliable Creality printer that is made to beat the rest. You can expect stellar quality regardless of what you are printing.
Regardless, it also provides ‘true-to-life’ details and smooth printing. Creality finally addresses the hassle of manual bed leveling as well!
So, you can expect that Ender CR-6 SE to come with a well-made automatic bed leveling system that keeps you away from any troubles you may have experienced in past models.
Besides this, the printer also requires no effort in its assembly, arriving to you pretty much fully built, allowing you to get printing once it arrives, some people have even completed its minimal assembly in five minutes!
As well as all these improvements, Creality also added in-built tensioners on both axes, with features dual lead screw, which flows nicely with the CR-6 SE’s aluminum build, and provides a high level of stability.
This is how the Z-wobble has been decreased and made the CR-6 SE reliable. There is also an 8-bit motherboard that powers the printer, which leads us to tell you about the surprising level of quietness this machine provides, almost whisper quiet.
Further adding to the list of these high-quality features, the CR-6 SE is also equipped with a photoelectric filament sensor as well as print power recovery.
Not only this but also, it has a pristine LED touchscreen with a fresh user interface, operating this innovation is pretty easy, easy enough for beginners to have no trouble with it.
It is the most expensive out of all of these printers, but as you can see it is certainly worth it, and considering it falls at the $400, it is not bad at all for what you get.
Specs for the Ender CR-6 SE
235 x 235 x 250 mm
Max Hot End Temperature
Max Heated Bed Temperature
Print Bed Type
PLA, ABS, PETG, TPU.
The Ender CR-6 SE is available for purchase at banggood.com
Creality Ender 3 Vs Pro Vs V2 Vs CR-6 SE Buying Guide
Now that we have had a good look at all these fantastic models, let’s take some time to look over the key difference between each Creality printer.
This can help deduce which printer is the one for you and will meet your needs the most.
You may want something that will print very quickly, however it is recommended to print slowly. Slow printing will produce the most concise of prints and will allow you to have optimal detail in what you have printed.
When looking at the print speeds of the Creality printers, we can see that the maximum print speed is nearly the same across all of these printers, aside from the CR-6 SE, which is significantly slower than the older models.
See what we mean here:
- Creality Ender 3: 200 mm/s
- Creality Ender 3 Pro: 180 mm/s
- Creality Ender 3 V2: 180 mm/s
- Creality Ender CR-6 SE: 80-100 mm/s
As we can see here, the Ender 3 is the fastest of all four, able to print at 200 mm/s. The Ender 3 Pro and Ender 3 V2 are equally fast, while the Ender CR-6 SE is the slowest overall, printing in the range of 80-100 mm/s.
If you are deciding by speed this is a good way to judge, but do remember that it is always recommended to print slower, even though it can be frustrating or time-consuming, slow prints tend to yield better results.
If you are more focused on the quality of the print, then you will find spectacular results around every corner.
First of all the Ender 3, at such a low price provides excellent value for money. Though it may take you a couple of attempts to gain an ideal print quality from it, overall the Ender 3, with all its hallmark features and a few ups and downs now and again, is still a very worthy printer.
Then, secondly the Ender 3 Pro, still being rather synonymous to the Ender 3, with some differences, provides quality.
Despite its similarities to the Ender 3, its differences do make it a better machine, despite it costing a little extra. It is safe to say that so long as the manufacturer is Creality, you will be delivered an astounding level of quality.
Next, and thirdly, the Ender 3 V2, does bring some new quality changes to the table. These changes include aesthetic changes that provide the machine with a professional look and astounding features. Overall, it's higher in quality than the original Ender 3 version, and its predecessor, the Ender 3 Pro.
Finally, the Ender CR-6 SE is the legend of the lot. It is peak quality over all these other options. Combining a variety of major factors such as easiness of use, build quality, print quality, and so on, provide you with substantial value for money and a hassle-free experience. This is the top-dog of quality.
Cost of Printer
Even if you are on a budget, all of these printers are friendly. None reaching the typical market prices for what you would usually get a printer of this skill for.
They are all extremely affordable, but let’s give you a breakdown of how much each Ender printer will cost.
- Ender 3: You can get the Ender 3 Printer from Amazon for prices as low as $199. It is probably the best printer on the market for a price this low.
- Ender 3 Pro: The Ender 3 Pro is priced at around $240 on Amazon. Although, you can get it even cheaper if you purchase it while it is on sale on the Creality official website.
- Ender 3 V2: The Ender 3 V2, has a retail price that is usually around $280, but it is very well deserved since the V2 offers you even more than the Ender 3, and the Ender 3 Pro. You get a bucketload of functionality and more.
- Ender CR-6 SE: The Ender Cr-6 SE is the most expensive printer we are looking at, it costs close to $400, which is still a complete bargain in comparison to similar printers available. This printer however is only available from Banggood, it isn’t available on Amazon.com, like the rest are, which is a shame.
If you are not more focused on the price of the machine, or the quality due to how similar the quality is of them all, you may want to make your choice based on the features, how much each machine has to offer, and what differences each machine has that may allow you to do more.
- Ender 3: The Ender 3 offers fully open-source printing. It has a decent and sizable print platform at a fantastic price. You will get a power recovery option that can automatically resume a print if it gets accidentally shut off. Or, even if you have a printer already, one that doesn’t have this feature, and your biggest concern is to get a printer that has your back.
- Ender 3 Pro: Then, the Ender 3 Pro, offers some fantastic upgrades in its features, offering a magnetic build plate which does help with some possible issues in the Ender 3. It also offers a 40 x 40 aluminum extrusion that helps boost stability, another improvement on the Ender 3. As well as a heated and large print bed. The one biggest issue that wasn’t tackled in this upgrade of the original model was the issue of leveling the bed.
- Ender 3 V2: This version of the Ender 3, is an even more hardcore upgraded version. It features a glass print bed, which is a significant remodeling over the Ender 3 Pro’s magnetic print bed, which can pile up filament residue as the printing hours pile up. One of the much-enjoyed features of this version is the tool storage option, as well as a prompt print resume after a sudden power outage, this improves on the Ender 3’s print recovery.
It also has a better belt tension adjusting system, that is far above the Ender 3, and the Ender 3 Pro options. Not to mention the built-in silent motherboard, which provides you with faster and more stable motion performance.
- Ender CR-6 SE: The first primary feature that anyone wants to hear about in this model is the automatic leveling system that does all the work for you, finally, they brought in this upgrade!
Then there are also other great features in this most recent model, as well as the well-designed storage toolbox that you can use for storing your bits and pieces. There is the 8-bit silent motherboard and a rich user experience that comes with the LCD screen.
Not to mention the added belt tensioners that refine the CR-6 SE’s stability for your ease of use. Then there is the carborundum glass plate that makes removing your print a breeze, unlike the magnetic platform on the V2 which was not quite as forgiving as we would’ve liked.
- Ender 3 and Ender 3 Pro: The Ender 3, and the Ender 3 Pro are easy to use printers that have a manual calibration that is super smooth for handling. This is one of the most major points that make them some of the most desirable machines on the market, their uncomplicated running is just too good to resist.
Both of these machines have an easy assembly and are print-ready straight out of the box.
Although, it is worth mentioning that the extruder belt on the Pro model will take some attempts to get right. However, that being said, both printers’ interfaces are great to navigate and easy to operate.
- Ender 3 V2: One issue that has remained consistent in the Ender 3, and has continued into the Ender V2, is the feeding of the filament through the hole beside the leadscrew. This issue is simply concerning loading the filament. Yet the manufacturer was able to fix this issue on the Ender 3 Pro, but somehow not on the V2 model.
Besides this, the V2 is also a fantastic model that can allow for substantial ease of use, if the name ‘Creality’ is there, you can expect ease.
- Ender CR-6 SE: In comparison to the previous 3 printers, the CR-6 SE is unrivaled in its user-friendliness. The initial set-up only takes a moment, and once this is done you can get printing away as immediately as you want. This will be followed by a painless printing process.
The process of the manual bed leveled that remained a user pain-point is now non-existent, having been replaced by a fully functioning automatic bed leveling system. Not only this but the big icons on the highly accommodating LCD screen, further assist your time spent printing. You also get the toolbox and a filament spool holder that makes everything all that much better.
- Ender 3: A simplistic design while remaining compact, a suitable built platform, with V-slot wheels. It suffers slightly on the stability and you may have to place a wedge under a corner to maintain stability. Otherwise, it is a very stable machine.
- Ender 3 Pro: Similar to the Ender 3, it has a few upgrades, it has 40 x 40 aluminum extrusion increasing stability and firmness. Its bearing wheels are mounted on the printer to reduce friction too.
- Ender 3 V2: This model is a bit more attractive with streamlined aesthetics. The relocation of the power supply, makes this version look much more professional.
- Ender CR-6 SE: The CR-6 SE is a modern machine that has a fashionable style. It has an aluminum frame, dual lead screws, a redesigned extruder system, and a distinct handle atop the gantry. This helps with ease, aesthetic appeal, professionalism, and even ease of transport!
- Ender 3: With the Ender 3, you will be able to print most filaments because it is simply a good printer. ABS, PLA, PETG, TPU are all compatible, however, some exotic filament you may find to be less successful. It specifically struggles with wood-fill filament so you shouldn’t expect much success in printing special thermoplastics.
- Ender 3 Pro: With not many improvements in the compatibility of the Ender 3, it still struggles with more brittle filaments like wood, due to the feeding on the filament system. Most of the time a brittle filament will break when they are pushed through the opening. But it is still fantastic with mainstream filaments.
- Ender 3 V2: The Ender 3 V2 is a bit better, taking on ABS and PLA from different brands. It can hold up well with some exotic filaments but can do even better if you give it some upgrades to do so.
- Ender CR-6 SE: This version welcomes thermoplastic materials. With its PTFE tubing and a better extrusion system that allows easier flowing filament, it is great to work with all major materials such as ABS, TPU, PETG, and PLA.
To sum up, entirely, all of these printers are fantastic and worth what you pay for them.
But, if money is not an issue then we strongly recommend getting yourself the Ender CR-6 SE, as it is the best and most upgraded version with the most features, and ease that you can get in a budget 3D printer.